The laser marking machine series produced by Foshan Fulan Laser are classified according to the types of lasers. There are mainly five types: optical fiber, green light, ultraviolet, carbon dioxide, and mopa. Different lasers are suitable for different materials or marking effects. Because the molecular structure of each material is different, the wavelength of each laser is also different, and the acceptance rate of the workpiece is different.

Glass is an extremely fragile object. It is difficult to engrave pictures and texts on it. When engraving on the glass surface with a laser, a very high energy density is required, but if the energy density is too high, cracks will appear. Even chipping phenomenon, too low energy density will cause the hit points to sink or not to be etched directly on the surface, so the processing is more difficult. However, marking on the glass is a piece of cake for Guangdong Foshan Fulan Laser Technology Co., Ltd. Next, the editor of Foshan Fulan Laser will briefly introduce to you the laser marking machine suitable for all kinds of glass-ultraviolet laser marking machine.

The laser wavelength of the UV laser marking machine is 355nm, the marking range is ≤300×300(mm), the maximum line speed is 12000mm/s, the minimum line width that can be marked is 0.01mm, and the minimum character is 0.06mm. Foshan Fulan Laser There are three main types of UV laser equipment produced: FL-E3-3, FL-E3-5 and FL-E3-8. Non-standard laser equipment can be customized according to customer needs.

Feature description of Fulan laser UV laser marking machine:

1. Imported laser light source, high beam quality, small focus spot, making marking more precise and clearer;

2. The heat-affected area is small, no heat effect is generated, and the deformation or scorching of the processed material is avoided;

3. It is applicable to a wide range of materials, which solves the problems of insufficient detail and poor effect of fiber laser marking for many materials;

4. Fast marking speed and high efficiency.

Application areas:

Mainly used in the high-end market of ultra-fine processing, 3C industry marking, electronic components, electrical appliance shell marking, food, medicine and other polymer material packaging bottles marking; metal or non-metal coating removal; marking of various materials, blind Groove processing; production of new ultra-thin metal foil micro-holes, etc.

Curved glass marking

Flat glass carving

Laser-engraved light-transmitting graphics and text for sprayed glass