Introduction: Fiber laser marking machine has the advantages of long service life, maintenance-free, no consumables, high stability, wide application range, and low cost. It is mainly used for marking metal and some non-metallic materials with higher ignition point and harder.

Body:

1. Can the fiber laser printer mark plastic materials?

Can fight. But it is only suitable for marking some plastic materials (such as PC, ABS) with higher ignition point or harder. There are many kinds of plastic materials. Generally, the texture is hard, and the darker the color, the better the effect of marking with a fiber laser marking machine. If the conditions are not met, the results will be poor, or even impossible.

PS: Adding laser marking powder to the plastic can make the mark clearer and will not fade due to physical or chemical factors.

2. Can the marking on the plastic be erased?

Can't. Because the laser marking is permanent, unless the surface layer is scraped off, it cannot be wiped off.

3. Can a variety of different colors be marked on plastic parts?

Can't. Since the laser marking machine is a marking (lettering, engraving) equipment that does not require consumables, the color marked on the object is generally based on the material of the marked workpiece, the model used, and the adjustment It depends on the parameters, not what color you want to be able to print out what color. Therefore, according to the material and color of the workpiece to be marked, gray, black, white or background color can generally be printed, and the depth of the color can be adjusted, but multiple colors cannot be printed.

4. Will marking on plastic burn the product?

Not necessarily. This depends on the material being hit and the parameters adjusted. Laser equipment is non-contact processing, and the output power is generally not high. As long as the parameters are adjusted properly, the laser will only vaporize a thin layer of the plastic surface without burning the plastic product itself.