Laser engraving machines, that is, laser marking machines, laser engraving machines, laser machines, etc., are called differently in different places, but they are actually the same equipment.

   The marking software used in the laser marking machine produced by Foshan Fulan Laser Technology Co., Ltd. is EzCad2, which has very powerful functions. For the functions of the marking software, please click "Laser marking machine software EzCad2 main function introduction" Below, Fulan Laser mainly talks about the filling type and how to choose the right type during marking.

The figure to be filled must be a closed curve. The toolbar icon corresponding to the "Fill" menu is  , after selecting the fill, the fill dialog box will pop up (as shown in the figure below):

There are mainly the following types of filling:

1. One-way filling: The filling line is always filled from left to right.

2. Two-way filling: the filling line first fills from left to right, then fills from right to left, and the rest is filled cyclically.

3. Circular filling: The filling line is the circular offset filling of the object outline from outside to inside.

4. Optimize two-way filling: similar to two-way filling, but there will be connecting lines between the ends of the filling lines.

The above several filling types can be switched by clicking the button with the mouse, which can be set or changed conveniently and quickly according to the actual effect.

So, how to choose the filling type during laser marking processing?

Optimized two-way filling: the highest marking efficiency, sometimes there will be problems of connecting lines and unevenness.

Two-way filling: The marking efficiency is second, and the effect is good.

One-way filling: the slowest marking efficiency, rarely used in actual processing.

Ring filling: only used when marking fine graphics and fonts.

The specific needs depend on factors such as the material of the workpiece to be marked, the effect of marking, and the requirements of marking speed.

PS: If you do not require detailed effects, Fulan Laser recommends that you choose bow filling or bidirectional filling, because bow filling can improve marking efficiency, and bidirectional filling is the best choice to ensure effect and efficiency.