When the CO2 laser marking machine with a laser wavelength of 10.64um is working, there is a certain danger if it fails. Novices must be professionally trained before they can operate independently. Foshan Fulan Laser Technology Co., Ltd. has summarized 16 matters needing attention in the use of CO2 laser marking machine based on years of experience. Below, I will share with you, I hope to have some information for users who are using or are planning to purchase CO2 laser equipment. Helped.

1. Observe the safety operating procedures, strictly follow the startup steps of the equipment, and do not operate randomly;

2. Equipment operators must be trained to be familiar with the structure and performance of the equipment, and master relevant knowledge of operation;

PS: Foshan Fulan Laser will conduct professional one-on-one training operations for customers. Training method: centralized teaching, on-site operation demonstration. Until the customer can operate the equipment correctly and skillfully.

3. Please bring safety goggles when you work to prevent strong light irritation from damaging myopia glasses;

4. Before marking the new product, make a sample first, and then mark the product in batches after the sample effect is OK;

PS: If you encounter a problem that you cannot solve by yourself, please contact Foshan Fulan Laser. Fulan Laser technicians will be on call to solve them at any time. When necessary, timely and decisive on-site service will be adopted to minimize the loss of customer time.

5. Do not use a CO2 laser marking machine to process the marked product before it is clear what material it is to avoid danger;

PS: CO2 laser machine is mainly suitable for marking and cutting wood, bamboo, acrylic, paper, leather, cloth, stone and other non-metallic materials;

6. When the equipment is running, the operator shall not leave the post without authorization or entrust an untrained person to be taken care of. If it is necessary to leave, the operator should stop the machine or cut off the power switch;

7. Keep the fire extinguisher within easy reach;

8. Turn off the laser or shutter when not processing;

9. Do not place flammable materials near the unprotected laser beam;

10. When an abnormality is found during processing, the machine should be shut down immediately, and the fault should be eliminated or reported to the supervisor in time;

11. Keep the area around the equipment clean, orderly and free of oil pollution;

12. For chillers, pay attention to keeping the internal circulating water clean, regularly clean the water tank and replace with deionized water or pure water;

13. Note that the laser marking machine's breadth must not exceed the working breadth;

14. For safe use of electricity, do not operate with wet hands;

15. During the whole operation of the laser marking machine, it is strictly forbidden to extend your head and hands into the range of the laser scanner to prevent accidental injury;

16. Don't turn on and off frequently, at least 3 minutes after turning off the machine before turning it on.